Test Current 0~35a Wire Bending Resistance Tester Maximum Test Wire Diameter 9.5mm
Wire bending resistance testing machine JD-3005
fulfill the standard:
Complies with IEC227-2, IEC245-2, UL1581, VDE0472, IEC60227-2(ed2)1997, IEC60245-2(ed2)1994+A1:1997, HD22.1 5.6.3.1, 5.6.3.2 standard, GB5023.2 and GB5013.2 standard design and manufacture.
Scope of application:
This machine is suitable for testing the flexural test of the soft cable of rubber and plastic insulation and sheath under load. The following wire and cable faults are detected and stopped during the test: 1) conductor break 2) short circuit between conductors 3) cable test Short circuit between the sample and the pulley.
The main function:
1. Test sample type: two-core single-phase, three-core three-phase, four-core three-phase
2, test mode: no load, single phase (two core), three phase (three phase three wire / three phase four wire) can choose
3, stop mode:
A, can indicate: O, R, S, T phase disconnection
B, can indicate: R / S, R / T, S / T, R / O, S / O, T / O short circuit
C, can indicate: O, R, S, T and pulley short circuit
| Flexing speed |
0．33m/s /0．01m/s |
| Two pulley movement distance |
≥1M |
| Test current |
0～35A |
| Test line diameter |
9.5mm maximum |
| Test voltage |
Two-core single-phase AC: 0～250V adjustable/three-core three-phase AC: 0～450V adjustable, 50 HZ |
| Test line type |
Can detect single-phase, three-phase three-wire, three-phase four-wire |
| Heavy hammer |
0.5, 1.0, 2.0, 3.0, 7.0Kg can be selected |
| Pulley structure |
The trolley is a two-wheel/three-wheel structure |
| Pulley diameter φ |
60,80,120 /40,45,50mm |
| counter |
Electronic, 6-digit, automatic shutdown when the set number of times is reached |
| Volume (W × D × H) |
188×53×150cm |
Product Tags:
|
|
Current 0~35a Wire Bending Resistance Tester Maximum Test Wire Diameter 9.5mm Images
|
